'73-'86 Kawasaki Engine and Transmission Parts

I have lots of parts for these vintage air cooled bikes, way too many to list or show.
The pics on this page represent maybe 1% of what I have on hand.
I do not have everything, but I do have alot of stuff. Email me your list
and I will get back to you on availablity, condition, and price.
I can also email pics of many parts upon request.
-
------------------------------------------
This page has been updated on 22 Oct 2017
--------------------------------------------
-

If you are looking for parts email me with your list and I will see what I have
and check on their condition. I can usually email pics of parts you are interested in.

Send email to the OldKawMan




FRESHLY REBUILT J model head with APE KZ cam chain tower, big valves, ported and relieved, tach drive,
WEBB 0.425 lift, 260 duration at 0.050 lift, shimmed, timed, ready to install
You can still see the assembly lube. This was done by Cycle Specialist, Spiderman's shop. $1199 plus shipping


1979-80 kz1000 crank, MKII big pin crank, has 16 tooth cam sprocket
Very nice condition, $199 plus shipping


Chrome exhaust collars
NEW chrome exhast collars for 900 head, 6mm studs, 18069-045, $25 each ( only 2 left)


Transmission Jumping Out of GEAR? These are the parts you need to fix it.
The most common transmission problem is jumping out of 2nd gear on accelleration.
Output shaft 2nd gear, output shaft 5th or high gear, and the shift fork that engages them
The "dogs" on the high gear engage in the 2nd gear "slots" to turn the shaft.
If the "dogs" or "slots" are damaged, the transmission gear jumps out of gear.
If the engagement fork and the slot in the 5th gear are worn, then the 2nd and 5th gears
will not fully engage and the transmission jumps out of gear. When the transmission jumps out of gear,
the components are further damaged. Here is what you need to fix this problem.
shift fork, VGC, inspected, $29
2nd gear output shaft, VGC, inspected, $99
5th gear output shaft, VGC, inspected, $129
All other gears, shafts, and clutch components are also abailable


1973-80 finned exhaust collars, USED
900 finned exhaust collars, holes for 6mm stud head, $45 set
1000 finned exhaust collars, holes for 8mm stud head, $45 set


KZ1000A cases, bored for 1200, 1230, 1260cc sleeves, has APE Main bearing and cylinder stud sets, APE main bearing support, $199


Used chrome finned clutch cover for all 1973-80 900/1000, with good oil sight glass, $29


New ones are all gone, but I still have several good used ones.
1973-80 cam chain tensioner roller and frame assembly, USED, $49


1973-80 chrome oilcap, VGC, $19
1973-80 rubber cover for kick starter splines, $13


This is a set of High Quality and Chrome Luster 18-8 Stainless Steel allen
socket head engine cover bolts, I have different sets according to year.
all the right sizes for the valve cvr, ign, dyno, clutch, kicker,
These are made in the USA high quality, high luster, 18-8 Stainless Steel alloy
These have a chrome like apearance but will never lose the shine and never rust

-------------------------------------------------------------------

1973-1978 900 and 1000 models, 47pc, $37 per set
Click the BUY NOW, TOTAL OF $42 includes postage in the USA

Click the BUY NOW button to purchase, TOTAL OF $42 includes postage in the USA

----------------------------------------------------------------

------------------------------------------------------------------

A 51pc set is available for the 1979-80 KZ1000 with the smog head
all the right sizes for the valve cvr, ign, dyno, clutch, kicker,
$39 per set, use the buy now button
TOTAL OF $45 includes postage in the USA

Click the BUY NOW button, TOTAL OF $45 includes postage in the USA

-----------------------------------------------------------------------------

--------------------------------------------------------------------------------

A 59pc set is available for the 1973-80 Z1 900 and KZ1000 with a J model or GPz head
all the right sizes for the valve cvr, ign, dyno, clutch, kicker, $44.95 per set,
BUY IT NOW USING PAY PAL, TOTAL OF $49.95 includes postage in the USA

Click the above link to BUY IT NOW USING PAY PAL, TOTAL OF $49.95 includes postage in the USA

----------------------------------------------------------------------------------

-----------------------------------------------------------

A SPECIAL 4pc COUNTERSHAFT SPROCKET COVER set is now available
These are the long bolts that hold on the front sprocket cover
These are made in the USA high quality, high luster, 18-8 Stainless Steel alloy
These have a chrome like apearance but will never lose the shine and never rust
BUY IT NOW USING PAY PAL, TOTAL OF $24.95 includes postage in the lower 48
<

Click the BUY NOW button, TOTAL OF $24.95 includes postage in the USA

---------------------------------------------------------------------------

-------------------------------------------------------------------------------


These items are going very fast, used cam chain idler sprockets $29 each,
tensioner brackets $47,
rubber pillow dampers $1 each, lower rubber rollers $33, etc.


I have the following cranks available stored in oil,
1979-80 kz1000 crank, MKII big pin crank, 16 tooth cam sprocket, $199 plus shipping
Welded 1978 crank with 15 tooth cam chain gear, no key, $149
1977 kz1000 cranks with 15 tooth cam chain gear for use with keyed rotor, $99
Welded 1977 kz1000 cranks with 15 tooth cam chain gear for use with keyed rotor, $99
1978 kz1000 cranks with 15 tooth cam chain gear, no key, $129
1979 LTD crank, 15 tooth cam chain gear, no key, $129
All plus shipping cost

List of NEW Gaskets available for Kaw 900/1000/1100;
.
NEW COMETIC Graphite Head gasket for 76mm bore, C8020, $30
.
NEW COMETIC Copper Head gasket for 72mm bore, C8154, $40
.
NEW COMETIC Copper Head gasket for 78mm bore, C8157, $40
.
NEW WISECO Graphite Head gasket for 78mm bore, W3920, $30
.
NEW COMETIC Copper Base gasket for 78mm bore, 0.020 in thick, $15
.
NEW COMETIC Clutch Cover gasket for 900/1000, $5
.
NEW COMETIC Valve Cover gaskets for Kaw J and GPz model 1000/1100, $9
.
NEW KAWASAKI OEM 1973 Z1 900 single piece head gasket, $20
.


shifter mechanism cover, $29
oil filter bolts and covers. VGC, $19


output shaft or front sprocket cover, tear drop style, $19-$59


1973-78 alternator covers, all have cosmetic issues, but do not leak oil
top cover has pitting, bad chrome, $19
left cover chrome, has road rash, $19
right cover aluminum has road rash, $19


right side clutch covers, priced accorning to condition, $15 to $35
crank case vent asemblies, $17
Kicker covers, $9
Starter motor covers, $7-$19


1973-80 chrome finned clutch cover in VGC, $35


Oil pumps and more oil pumps, fits all 1973-83 900/1000/1100
Z1 original with screw on screen, rare item, $37
1977-80 kz1000 pumps, fits 900 also, $37
1981-83 KZ1000J and KZ1100A oil pumps, nice upgrade for older models, $47
1983-84 ZX1100A (GPz1100) oil pump, not shown, best 900 pump there is, (CURRENTLY UNAVAILABLE


chrome engine sprocket cover, $45


Chrome fuel bowl for VM26SS and VM28SS oem carbs, NEW, $25

The Old Kaws Never Die Series NOW AVAILABLE on CD at Reduced Price

You can purchase a CD-ROM with my Old Kaws Never Die Series including
NEW chapters not available on the web site. My Race Engines and
Swingarms series are only available on this CD-ROM.
My Tips & Tricks FAQ is also only available on this CD-ROM
Includes the latest chapter on replacing the 1978 and earlier regulator and rectifier
with a modern solid state unit. Detailed step by step instructions with wiring diagram
All files are in PDF format, PDF readers are freely available.
-
The price is $19.95 includes postage in the USA.

-

International Shipping costs more --> Total of $29.95 USD - Click Below For International Sales

Send email to the OldKawMan

Website Directory