'73-'75 Kawasaki Z1 900 parts
I have lots of parts for 900 Z1 bikes, way too many to list or show.
The pics on this page represent maybe 1% of what I have on hand.
I do not have everything, but I do have alot of stuff. Email me your list
and I will get back to you on availablity, condition, and price.
I can also email pics of many parts upon request.
These are LOW Profile Crankcase Breather Cover Kits for all 1973-80 Kaw 900/1000 motors,
The required special adapter bolt and orings are also included, the oem bolts will not work.
This includes the large oring and also the very important installation instructions.
Price is $29.95 includes priority mail shipping in the USA (International Shipping is HIGHER)
BUY THIS KIT NOW
Chrome fenders,hard to find chrome fenders, NEW chrome very pretty!
NEW LTD fender, 1977-80 kz1000B LTD, $159
New re-chrome standard model fender, 1973-78 900Z1, kz900, and kz1000A, $179
Brand NEW chrome Z1 and kz900 exhaust clamps, these fit the 6mm exhaust studs only,
$30 each
Chrome bits,hard to find chrome covers, very pretty!
nice chrome ignition housing, 1973-80 900/1000 models, $59
nice chrome finned DOHC ignition cover, 1973-80 900/1000 models, $59
nice chrome kick starter cover, 1973-80 900/1000 models, $39
This is the 2nd gear replacement kit.
If your bike jumps out of 2nd gear, this is what you need.
These parts are inspected and hand picked to be in excellent shape.
This the the gear the the dogs and slot for the fork,
the gear with the engagement slots, and the fork.
Send your old tranny along with these gears out to
MRE to have them back cut for best results, $159 per kit
Buy The 2nd gear kit
NEW solid state regulator/rectifier with detailed diagram and instructions
for converting all 1973-78 Kaw 900/1000 models from the seperate units
which often fail due to 30 year age and the poor technology available at the time
This is a NEW Electrolux unit that will be totally dependable and extend battery life.
$139 includes postage anywhere in the USA
Buy the Reg/Rect Kit
Z1 tail trays and indicator covers
I can sell you complete cuctom oil cooler kit for you to install.
Same exact setup I use on my own bikes
$249 as shown in the above pic or $199 without the press gauge plus $9 flat rate priority mail postage
Kit with Gage
Kit no Gage
This is a set of High Quality and Chrome Luster 18-8 Stainless Steel allen
socket head engine cover bolts, I have different sets according to year.
all the right sizes for the valve cvr, ign, dyno, clutch, kicker,
These are made in the USA high quality, high luster, 18-8 Stainless Steel alloy
These have a chrome like apearance but will never lose the shine and never rust
-------------------------------------------------------------------
1973-1978 900 and 1000 models, 47pc, $39 per set
BUY IT NOW USING PAY PAL, TOTAL OF $47 includes postage in the lower 48
Click the above link to BUY IT NOW USING PAY PAL, TOTAL OF $47 includes postage in the lower 48
----------------------------------------------------------------
A 51pc set is available for the 1979-80 KZ1000 with the smog head
all the right sizes for the valve cvr, ign, dyno, clutch, kicker,
$42 per set, BUY IT NOW USING PAY PAL,
TOTAL OF $49.95 includes postage in the lower 48
Click the above link to BUY IT NOW USING PAY PAL, TOTAL OF $49.95 includes postage in the lower 48
-----------------------------------------------------------------------------
A 59pc set is available for the 1973-80 Z1 900 and KZ1000 with a J model or GPz head
all the right sizes for the valve cvr, ign, dyno, clutch, kicker, $49 per set,
BUY IT NOW USING PAY PAL, TOTAL OF $57.95 includes postage in the lower 48
Click the above link to BUY IT NOW USING PAY PAL, TOTAL OF $57.95 includes postage in the lower 48
----------------------------------------------------------------------------------
A SPECIAL 4pc COUNTERSHAFT SPROCKET COVER set is now available
These are the long bolts that hold on the front sprocket cover
These are made in the USA high quality, high luster, 18-8 Stainless Steel alloy
These have a chrome like apearance but will never lose the shine and never rust
BUY IT NOW USING PAY PAL, TOTAL OF $29.95 includes postage in the lower 48
Click the above link to BUY IT NOW USING PAY PAL, TOTAL OF $29.95 includes postage in the lower 48
---------------------------------------------------------------------------
A SPECIAL 4pc COUNTERSHAFT SPROCKET COVER set is now available
These are the long bolts that hold on the front sprocket cover
These are made in the USA high quality, high luster, 18-8 Stainless Steel alloy
These have a chrome like apearance but will never lose the shine and never rust
BUY IT NOW USING PAY PAL, TOTAL OF $24.95 includes postage in the lower 48
Click the above link to BUY IT NOW USING PAY PAL, TOTAL OF $24.95 includes postage in the lower 48
-------------------------------------------------------------------------------
NEW K&N filters for 34-36mm Mikuni carbs, round taperd style,
fits the RS series flatslide carbs, may interfere with oem side covers,
These are pre-oiled, ready to install with clamps, $129 for set of 4
Left side original Z1 body covers, no cracks or damage, all mounting tabs are OK, need painted, $39 each
Cheap aftermarket side covers, $20 pair
These side covers have been repaired by me using 3M 2 part green industrial epoxy
Anyone familiar with this product knows it works great and it's very strong.
repairs are not visable except looking at the back of the cover, left sides are $29, right sides are $49
I only have one 1973-75 Z1 tail section left, different than the later
KZ models, more rounded, VGC, no cracks or damage, $89
Here is the best clutch lever I have found, the GPz1100 had a heavy 6 spring clutch
This is a BOLT ON and even has the mirror mount, just remove the plastic plug.
Help for those of us with carpal tunnel and arthritis, $39
I have pegs and peg brackets. So many different types used, very hard to match up.
WOW, almost like new ORIGINAL black long stem mirrors, these are the good ones
These mirrors do not vibrate like cheap aftermarket ones do, $59 for the pair
WOW, almost like new high quality CHROME long stem mirrors, these are good ones
These mirrors do not vibrate like cheap ones do. I run these same ones on my bikes, $29 per pair
Z1 specific LH or clutch side handle bar control pod, horn, turn signals, Hi/Lo beam.
Needs some cleanup, fully functional control, pigtail cover is stiff and cracked in places
1973-early 1974 original part, $59
LH control pod, very nice shape, 900/1000 through 1977 model, $59
NEW, OEM, front turn signals ground washers, $20 pair
Oil pumps and more oil pumps, fits all 1973-83 900/1000/1100
Z1 original with screw on screen, rare item, $47
1977-80 kz1000 pumps, fits 900 also, $47
1981-83 KZ1000J and KZ1100A oil pumps, nice upgrade for older models, $79
here are a couple of aftermarket EMGO clocks
Chrome speedo, nice, <5k miles, has the connectors on the lamps like the Z1 did, $49
Black tacho, good shape, no dents or dings, $37
High quality made in the USA 14 tooth front sprocket
fits all 1973-80 900/1000, $17
NEW APE manual cam chain tensioner, all 1973-80 900/1000 motors, $43
Engine rebuilding, head porting, oil coolers, and performance modifications
are detailed in my Old Kaws Never Die Series. Lots of technical info, pics,
and how to methods are covered.
The Old Kaws Never Die Series NOW AVAILABLE on CD
You can purchase a CD-ROM with my Old Kaws Never Die Series.
It is a how to guide on performance enhancements and mods for the Kawasaki 900 and 1000cc bikes.
It includes NEW chapters not available on the web site. My Race Engines and
Swingarms series are not available except on this CD-ROM.
Plus the latest chapter on replacing the 1978 and earlier regulator and rectifier
with a modern solid state unit. Detailed step by step instructions with wiring diagram
All files are in PDF format, PDF readers are freely available.
The price is $24.95 which includes postage in the lower 48 US states.
BUY IT NOW USING PAY PAL, TOTAL OF $24.95 includes postage in the lower 48